Zhejiang LEENY Technology Co.,Ltd.
-
Language
Full automatic 20L oil bottle pet blowing machine
Category:
Large capacity bottle (20L)
Summary:
When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter
Key word:
Filter
Full automatic 20L oil bottle pet blowing machine
Filter is an indispensable device on the conveying medium pipeline, usually installed in pressure reducing valve, pressure relief valve, water level valve, square filter and other equipment of the inlet end equipment. The filter is composed of cylinder, stainless steel filter, sewage part, transmission device and electrical control part. After the water to be treated passes through the filter cartridge of the filter screen, its impurities are blocked, and when it needs to be cleaned, just take out the removable filter cartridge and reload it after treatment, so it is extremely convenient to use and maintain.When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter.
10/20L PET Bottle Making Machine – Big Bottle Blowing machine This PET bottle blowing machine is a two step fully automatic blow moulding machine specially designed for 5 liter edible oil bottle production,best choice for productions with big volume,high speed and full automation.It has 3 cavities with up to 5 liters for each cavity,suitable as welll for other bottles above 2 liters ,like carbonated drinks,low-middle tempeprature juice beverage,mineral water and pestcide,etc.
| General Information | LEENY -20L cavity |
| Clamping Force | 50 T |
| Clamping Stoke | 350mm |
| Max.Stretching Stroke | 420mm |
| Bottom Moving Stroke | 0-50mm |
| Number of Cavities | 2 Cavity |
| Theoretical Output | 10-25L:200-500 BPH |
| Max.Mould Thickness | 600mm |
| Mould plate size | 630x630mm |
| Total Power(Full Loaded) | 10-25KW |
| Min air compressor | 3.2m3/min 3.0Mpa |
| Min air compressor | 1.6m3/min 1.0Mpa |
| Electrical System | |
| Voltage Standard | 380v/3PH/50Hz or special order |
| Number of Heating Zone | 2 Sections |
| Total Power(Full Loaded) | 50KW |
| Container | |
| Container Volume | 1.0-6.0L |
| Neck Diameter Range | 38-60mm |
| Container Diameter | 300mm |
| Container Height | 400mm |
| Air system | |
| Low Air compessor | 8-10Bar |
| High Air compessor | 30-40Bar |
| Net dimension & Weight(LxWxH) | |
| Blow Molding Machine | 450x300x220cm |
| Preform Autoloader | 250x220x220cm |
| Net Weight | 4.8T |
Previous page
None
Next page
HELLO, LEAVE YOUR THOUGHTS
A demand is the prerequisite for the establishment of cooperation and the beginning of the service.Fill out the demand form immediately and we will get in touch with you in time.
LEENY
Contact
Add: Daotou Village, Jiangkou Subdistrict, Huangyan District, Taizhou City, Zhejiang Province
Tel: +86-576-84133222
+86-13058792299(Bottle blowing equipment)
+86-18958575188 (Granulation equipment)
E-mail: leeny@leeny.cc
Copyright @ Zhejiang LEENY Technology Co.,Ltd. All right Reserved. Powered by www.300.cn SEO
