E-mail: leeny@leeny.cc / Tel: +86-13058792299
-
Language
Hand Feeding Preform Auto Blowing Machine
Category:
Hand Feeding Preform Auto Blowing Machine
Summary:
When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter
Key word:
Filter
Hand Feeding Preform Auto Blowing Machine
Filter is an indispensable device on the conveying medium pipeline, usually installed in pressure reducing valve, pressure relief valve, water level valve, square filter and other equipment of the inlet end equipment. The filter is composed of cylinder, stainless steel filter, sewage part, transmission device and electrical control part. After the water to be treated passes through the filter cartridge of the filter screen, its impurities are blocked, and when it needs to be cleaned, just take out the removable filter cartridge and reload it after treatment, so it is extremely convenient to use and maintain.When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter.
Hand feeding PET blowing machine
H2 is hand feeding wide-neck PET jar blow molding machine.It’s best choise for wide-mouth/big neck PET jar/PET can. H series bottle blowing machine is a professional equipment designed for cosmetic bottles, daily-chemical bottles,special-shaped bottles,small-quantity conventional bottles,which is simple to operate and has a wide range of applications.It is suitable for various diameter of PET bottles for various purposes.H series bottle blowing machine is not equipped with auto-loader.It is by manual.It is stable and reliable,with low cost,safe and practical alternative to traditional semi-automatic equipment.
Features
1.Wide versatility, suitable for a variety of diameters and shapes, especially for daily-chemical products.
2.Without auto-loader, update and change preform more quickly.
3.High safety,no contact with mould-clamping and high-pressure blowing units,away from dangerous areas.
4.Low labor intensity.
5.With advanced PLC control system,excellent performance and stability.
6.High heat penetration and preform rotation by itself,making preform subject to even heat during preheating process.
7.Safety locking device in every mechanical action to protect operator's safety.
8.Use different air pressure for blowing and machine operation, energy saving and environmental protection.
9.Use air cylinder instead of hydraulic cylinder, low pollution, low noise.
10.Advanced automatic process flow with low cost,high efficiency,easy operation and easy maintenance.
11.With both automatic and manual operation method.
12.Avoid bottle contamination,easy to install and start.
13.Low scrap rate.
Main Data
| project | LEENY-2000-2 | LEENY-2000-3 | LEENY-2000-4 |
| Theoretical output | 2000 | 3000 | 4000 |
| Maximum capacity of bottle | 2L | 2L | 2L |
| Maximum outer diameter of bottle mouth | 110mm | 110mm | 110mm |
| The maximum diameter of the bottle | 110mm | 110mm | 80mm |
| Maximum height of the bottle | 320mm | 335mm | 320mm |
| Number of cavities | 2 | 3 | 4 |
| Number of lamps | 40 | 50 | 60 |
| Maximum heating power | 60kw | 75kw | 90kw |
| Machine installed total power | 65 | 82 | 97 |
| Actual power consumption | 35kw | 40kw | 47kw |
| Working low pressure | 0.7Mpa | 0.7Mpa | 0.7Mpa |
| Low-pressure gas consumption | 1400Lre/min | 2000Ltr/min | 2000Ltr/min |
| Blowing bottle high pressure | 3.5Mpa | 3.5Mpa | 3.5Mpa |
| High-pressure gas consumption | 3500Ltr/min | 5250Lte/min | 5000Ltr/min |
| Chiller pressure | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.2Mpa |
| temperature range | 10.C | 10.C | 10.C |
| consumption | 30L/min | 40L/min | 40L/min |
| Machine size | 2.7X1.8X2.2m | 3.6x2x2.2m | 4.5x2.2x2.2m |
| Machine weight | 3500T | 4800T | 5500T |
Previous page
None
Next page
HELLO, LEAVE YOUR THOUGHTS
A demand is the prerequisite for the establishment of cooperation and the beginning of the service.Fill out the demand form immediately and we will get in touch with you in time.
LEENY
Contact
Add: Daotou Village, Jiangkou Subdistrict, Huangyan District, Taizhou City, Zhejiang Province
Tel: +86-576-84133222
+86-13058792299(Bottle blowing equipment)
+86-18958575188 (Granulation equipment)
E-mail: leeny@leeny.cc
Copyright @ Zhejiang LEENY Technology Co.,Ltd. All right Reserved. Powered by www.300.cn SEO
