Extrusion Blow Molding Machine(120-250L)

Category:

Extrusion Blow Molding Machine

Summary:

When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter

Tel:+86-13968670533

E-mail:leeny@leeny.cc

Tel:+86-15958616168

Messages

Return to

Key word:

Filter

Extrusion Blow Molding Machine(120-250L)

Filter is an indispensable device on the conveying medium pipeline, usually installed in pressure reducing valve, pressure relief valve, water level valve, square filter and other equipment of the inlet end equipment. The filter is composed of cylinder, stainless steel filter, sewage part, transmission device and electrical control part. After the water to be treated passes through the filter cartridge of the filter screen, its impurities are blocked, and when it needs to be cleaned, just take out the removable filter cartridge and reload it after treatment, so it is extremely convenient to use and maintain.When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter.

Specifications

LEENY double station extrusion blow molding machine is used to produce all kinds of the hollow plastic containers, such as:
oil barrel, sprayer barrel, cosmetics bottle, pharmaceuticals bottle, food package, plastic toys, Christmas ball, plastic experimental apparatus and auto-parts IBC container,blow molding trays,keg float, water horse isolation,toy,automobile fuel tank,automobile air pipe,seat , desktop board,the spray tank,the medical bed,canoe,surfboard,mobile toilet,plastic flower pot,large storage tank,heat insulation barrel,soft bag,plastic housing,recreation facility,Isolation enclosure,etc.

B. Machine Features:
B.1. a, Electronic control system: JAPAN MATSUBISHI PLC and human-computer interface(Chinese and English) control,Color touch screen operation,adopt the MITSUBISHI temperature control module;
b.All process setting,changing,searching,monitoring,fault diagnosis can be operate on the touch screen,no point contact work principle,and the electrical parts is more durable,Standard electric control cabinet,makes the component run time environment stability,extend the service life of the equipment;
B.2. Hydraulic system: Proportional pressure control,equipped with imported famous brand hydraulic ＆#118alue and pump,stable and reliable;
B.3. Plasticization system: Efficient plasticizing mixing screw,ensure plastic plasticizing completely;
B.4. Speed regulating system: Frequency control and hard alloy tooth surface reducer casing. Smooth speed,energy saving,low noise and durable;
B.5. Mold opening,molding moving system: Girder arm,three points position,center clamping opening and clamping mold structure,ensure the long time using. Clamping force equalization,without deformation,using the parallel mold moving (linear guide way),high precision,less resistance and fast speed;
B.6. Blowing needle plate: The whole square type needle holder,solid and no shift,to ensure products smooth incision;
B.7. Molding clamping sliding structure adopts linear guide way, accuracy up to micro level, the whole mold clamping combining a high position accuracy,easy and energy saving, and strong bearing,immutability, Patented products;three rod,single cylinder two-way synchronous mold clamping structure,stability is good.
B.8. Embryo reducing system: Independent system,shorten the cycle and improve efficiency.

Part name	Brand
PLC control program	Japan ,MTSUBISHI PLC
Temperature control part	Japan, OMRON
Hydraulic pump	Japan, SUMITOMO
Solenoid valve	China, AIRTAC
Servo valve	China,VTOS
Pneumatic cylinder	China, AIRTAC
Contactor	Korea, LG
Air switch	Korea, LG
Electric motor	Germany, SIEMENS(SSML)
Power supply	Taiwan,MEANWELL
Inverter	Taiwan,DELTA
Intermediate reply	Japan, OMRON
Human machine interface	France, GEFRAN

C. Technical parameter:

TYPE	Unit	LEENY-S120L	LEENY-160L	LEENY-260L
Max. Product Volume	L	120	160	250
Dry Cycle	Pc/H	600	450	360
Screw Diameter	MM	80	90	100
Screw L/D Ratio	L/D	26:1	26:1	28:1
Screw Heating Capacity	KW	6-8	7-9	8.5-10
Clamping Force	KN	200	230-300	300-400
Number of heating zone	Zone	4	4	5
Output of HDPE	Kg/Hr	100-120	140-200	180-260
Oil Pump Drive Power	KW	22	30	35
Mold Stroke	MM	140-380	150-480	160-550
Size of Mold	(W*H)MM	550*650	700*900	800*1000
Max. Die pin Diameter	MM	300	350	430
Blowing Pressure	Mpa	0.8	0.8	0.8
Air Volume	M3/Min	0.8	1.0	1.2
Cooling Water Pressure	Mpa	0.3	0.3	0.3
Water Consumption	L/Min	60	85	100
Weight of Machine	T	10	12	15

Automatic Extrusion Blow Molding Machine for 5 gallon PC Bottle

None

EXTRUSION BLOW MOLDING MACHINE

HIGH SPEED PLASTIC CAPPING MACHINE

AUTOMATIC BOTTLE BLOWING MACHINE

GXN400H SERIES LONG-LASTING PLASTIC MELT FILTER

HELLO, LEAVE YOUR THOUGHTS

A demand is the prerequisite for the establishment of cooperation and the beginning of the service.Fill out the demand form immediately and we will get in touch with you in time.

Contact

Add: Daotou Village, Jiangkou Subdistrict, Huangyan District, Taizhou City, Zhejiang Province
Tel: +86-13968670533

Tel: +86-15958616168

E-mail: leeny@leeny.cc