18cav Fast Speed Cap Compression Machine
Cap molding machine is for making caps from plastic materials.The heated materials are extruded from extruder,cutted by segregation plate through screw driving and shared to each cavity equably,then molded to be caps by forming system. The machine is controlled by PLC,including frequency control system,hydraulic system,temperature control system and cooling system.The operating system is easy and automatic with man-machine conversation. As same production capacity,its cost is much lower than produced caps from injection machine.It perfects products with this technology,since there is no gate on cap or no waste of hot runner.
Model | LEENY -18C | LEENY -24C | LEENY -36C | LEENY -48C |
---|---|---|---|---|
Production Capacity | 17000~18000 pcs/h | 23000~24000 pcs/h | 31000~32000 pcs/h | 47000~48000 pcs/h |
Cap Diameter | 20~42mm | 20~42mm | 20~42mm | 20~42mm |
Cap Height | 10~30mm | 10~30mm | 10~30mm | 10~30mm |
Cap Material | PP/PE | PP/PE | PP/PE | PP/PE |
Mold Cavity | 18 | 24 | 36 | 48 |
Power | 380v/3ph/50Hz | 380v/3ph/50Hz | 380v/3ph/50Hz | 380v/3ph/50Hz |
Installation Power | 30KW | 50KW | 75KW | 95KW |
Air Consumption | 0.9m3/hr,0.8Mpa | 1.4m3/hr,1.0Mpa | 2.8m3/hr,1.0Mpa | 3.6m3/hr,1.0Mpa |
Machine Dimension | 2660*1200*2000mm | 3800*1550*2100mm | 5500*3600*2100mm | 6000*3600*2150mm |
Machine Weight | 2.1T | 3.0T | 4.8T | 5.8T |
MESSAGE

Zhejiang LEENY Technology Co., Ltd. is located in Huangyan Economic Development Zone, Taizhou City, Zhejiang Province.
Add: Address: Shangnian Section of No.82 Sub-line, Huangyan Economic Development Zo
E-mail: leeny@leeny.cc
Tel: 0086-576-84133222
+86-13058792299 (Bottle blowing equipment)
+86-18958575188 (Granulation equipment)
QUESTIONS? CONTACT US
WHAT WE OFFER
Copyright © Zhejiang LEENY Technology Co.,Ltd. All right Reserved. 浙ICP备13025353号 Powered by 300.cn