E-mail: leeny@leeny.cc / Tel: +86-13968670533 +86-15958616168
-
Language
LEENY-5000 Semi-automatic blow moulding mahcine
Category:
Semi-auto Blowing Machine
Summary:
When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter
Key word:
Filter
LEENY-5000 Semi-automatic blow moulding mahcine
Filter is an indispensable device on the conveying medium pipeline, usually installed in pressure reducing valve, pressure relief valve, water level valve, square filter and other equipment of the inlet end equipment. The filter is composed of cylinder, stainless steel filter, sewage part, transmission device and electrical control part. After the water to be treated passes through the filter cartridge of the filter screen, its impurities are blocked, and when it needs to be cleaned, just take out the removable filter cartridge and reload it after treatment, so it is extremely convenient to use and maintain.When the filter is working, the water to be filtered enters through the water outlet, flows through the filter, enters the pipeline required by the user through the outlet for process circulation, and the particulate impurities in the water are trapped inside the filter.
LEENY-5000 semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3.The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
| General Information | LEENY -5000 FOR 5GALLON, one blower and one heater |
| Clamping Force | 22T |
| Clamping Stoke | 450mm |
| Max.Stretching Stroke | 660mm |
| Number of Cavities | 7-22L 1 Cavity |
| Theoretical Output | 7-22L 1 Cavity:90 BPH |
| Max.Mould Thickness | 400mm |
| Mould plate size | 600x640mm |
| Voltage Standard | 380v/3PH/50Hz or special order |
| Total Power(Full Loaded) | 10-25KW |
| Min air compressor | 1.6m3/min 3.0Mpa |
| Net dimension & Weight(LxWxH) | |
| Blow Molding Machine | 210x73x190cm |
| Pre-heater | 262x66x160cm |
| Net Weight | 2.5T |
| Container | |
| Container Volume | 7-22L |
| Neck Diameter Range | 50-330mm |
| Container Diameter | 400mm |
| Container Height | 640mm |
Previous page
LEENY-1500-4 plastic mineral bottle making machine
HELLO, LEAVE YOUR THOUGHTS
A demand is the prerequisite for the establishment of cooperation and the beginning of the service.Fill out the demand form immediately and we will get in touch with you in time.
LEENY
Contact
Add: Daotou Village, Jiangkou Subdistrict, Huangyan District, Taizhou City, Zhejiang Province
Tel: +86-13968670533
Tel: +86-15958616168
E-mail: leeny@leeny.cc
Copyright @ Zhejiang LEENY Technology Co.,Ltd. All right Reserved. Powered by www.300.cn SEO
