Semi Automatic Bottle Blowing Machine
molding machine is suitable for producing PET plastic containers and bottles from 100ml-2000ml(2cavities) or 2.5-3L(1cavity), it has 1 infrared heater+1 blower and 1 infrared heater+2 blowers, depend on your budgets and production speed requirement.
It is widely used to produce the carbonated bottle ,mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics bottle, medical bottles, wide-mouth jar, etc.Adopting double crank to adjust mould, heavy locking mould, stable and fast, Adopt infrared oven to heat the perform, the perform rotated and heated equally. The air system has been divided into two parts: Pneumatic action part and bottle blow part to meet the different requirements for the action and blow. It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
|General Information||LEENY -1500
One Blower And One Heater
Two Blower And One Heater
|Number of Cavities||1 Cavity||2 Cavity 2Pcs|
|Theoretical Output||0.1-1.5L:600-800 BPH||0.1-1.5L:1000-1600 BPH|
|Mould plate size||470x350mm|
|Voltage Standard||380v/3PH/50Hz or special order|
|Total Power(Full Loaded)||3-10KW||5-15KW|
|Min air compressor||1.0m3/min 3.0Mpa||1.2m3/min 3.0Mpa|
|Net dimension & Weight(LxWxH)|
|Blow Molding Machine||145x60x170cm||145x60x170cm 2Pcs|
|Neck Diameter Range||8-60mm|
Zhejiang LEENY Technology Co., Ltd. is located in Huangyan Economic Development Zone, Taizhou City, Zhejiang Province.
Add： Address: Shangnian Section of No.82 Sub-line, Huangyan Economic Development Zo